| LT-100 Series Motorized Up/Down Lifts |
| Conceal and reveal your TV with quiet precision
The LT-100 Series of motorized up/down lifts is typically used for lifting conventional TV's, computers collections, bars and safes from cabinets.
The LT-100 Series features all steel, welded construction with remarkably stable rack and pinion operation. No synthetic gears to deteriorate, no maintenance required. Backed by a three year limited warranty. Our state-of-the-art control options are; radio remote control, infrared remote control, or low voltage/contact closure control interface.
< Click the image to view additional information and download a .pdf drawing of the LT-100 Series. |
|
|
| LT-100 Series Dimensions
| Model |
Uses* |
Load Capacity |
O/S Dimensions |
Travel |
| |
|
|
|
|
| LT-100 |
Up to 13" TV |
100 lbs. |
24"W, 20"H, 16"D |
16.75" |
| LT-110 |
Up to 27" TV |
150 lbs. |
30.5"W, 28"H, 16"D |
24.75" |
| LT-120 |
Up to 27" TV |
200 lbs. |
31.5"W, 30"H, 16"D |
26.75" |
| LT-130 |
Up to 32" TV |
300 lbs. |
36"W, 34"H, 20"D |
30" |
| LT-140 |
Up to 36" TV |
450 lbs. |
42"W, 37"H, 20"D |
33" |
| LT-150 |
Multipurpose |
600 lbs. |
60"W, 46"H, 25"D |
41" |
(All Measurements in Inches)
* TV sizes and dimensions vary. Uses listed are a general indicator and do not apply to all TV's. |
| Sizing a Lift The rule of thumb for sizing a lift is that the overall width of the lift should be at least 4.5" wider than the width of your TV. The 4.5" accomodates the width of our gear racks and clearances between the gear racks, the inner box, and the TV. | |
| Available travel should be at least 1" more than the height of the TV. The depth of the TV is not an important consideration in initial sizing because your TV (and inner box) may overhang our motorized platform. The xray drawings on the right, and the photos of a cabinet being assembled below, should give you an understanding of how the lifting device operates within cabinetry. LIFT-TECH manufactures the lifting devices and control systems. We do not manufacture furniture.
| |
| Installation LIFT-TECH provides the lifting device. Your cabinetmaker completes the project. A motorized lift, properly sized for your television, is installed in the outer cabinet. The motorized platform of the LIFT-TECH lift travels up and down the gear racks that are secured to the cabinet sidewalls. | |
| An inner box is constructed to hold the television and support the cabinet top. The inner box is secured to the motorized lifting platform that moves by remote control. Note: The open cabinet doors are for demonstration purposes only. For safety reasons, it is recommended that cabinet doors be non-operative and for decorative purposes only. | |
| Controls
LIFT-TECH offers state-of-the-art controls for all our lifting devices.
- Radio remote control
- Infrared remote control
- Low Voltage/Contact Closure control interface to tie-in to a home automation system.
< Click on the image to get additional, detailed information regarding controls.
|
|
